Liming Road and Bridge Heavy Industry is the leading enterprise of rock & mineral processing equipment in the world. Since the end of the 20th century, we've installed about thousands of crushing equipment all over the world. Nowadays, JCE series crusher of European style has already uncontrovertibly become the most popular equipment in the world. Considering crushing efficiently hard and abrasion proof stuff, JCE series crusher adopted international advanced technology is the first choice

1. World-level manufacturing technology is adopted, perfect raw material is selected.
2. More advanced movable jaw assembly lengthens life of JCE
. Movable jaw assembly, composed of cast steel structure with high-quality, is driven by two big flying wheels which are also made from cast steel. Moreover, heavy eccentric axle is processed by forged mold. All of these make the JCE series crusher extremely reliable.
3. Integral cast steel structure is adopted for bearing seat.
Integral cast steel bearing matches well with the crusher frame, at the same time, radial strength of the bearing seat is highly strengthened. However, the separate bearing seat does not have this advantage.
4. Finite element analysis technology is adopted to make the crusher more stronger.
5. Crusher chamber adopts "V" structure which could make actual feed width comply with the nominal one.
6. Adjustment of the discharge part is more convenient.
Discharge part of JCE series crusher is installed wedge block, which makes discharge much simpler, safer and faster than the spacer on old style crusher.
7. Bearing with larger specification and stronger capacity are used.
8. A newly designed tooth-shape jaw plate, makes the available area of jaw plate longer, and enhances the capacity.

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Model		JC180×1300	JC250×1000	JCE250×1300	JC400×600
Opening Size (mm)		180×1300	250×1000	250×1300	400×600
Max. Feed Size (mm)		150	220	220	350
Discharge Opening Range (mm)		10-30	20-40	70-100	35-85
Shaft Speed (r/min)		320	330	290	250
Capacity (t/h)		12-35	15-50	26-85	15-70
Motor	Model	Y225M-6	Y225M-6	Y250M-6/Y280S-6	Y225M-6
	Power (kW)	30	30	37/45	30
	Speed (r/min)	980	980	980	980
Dimension (mm) (L×W×H)		1320×2150×1175	1400×1850×1310	1450×2150×1175	1920×1460×1840
Weight (kg)		6000	5600	6800	7000

Notice: Any change of European Type Jaw Crusher technical data shall not be advised additionally.